Used Surfboards for
Sale in Texas
To list your surfboard, send a check payable to:
SPadre.com P.O. Box 3295 SPI, TX 78597
email SPadre.com or call 956-772-7272 for additional questions.
Listings
are $20, listing will be posted after payment is received.
Your ad runs until it sells, no refunds.
Email photo, description and contact info with email or
phone and location.
"2 days after you listed
my board it is already sold. Now I have a nice down payment
for the new board I want this Spring.
Your board listings are better than a newspaper ad or eBay.
Many mahalos."
"I got inquiries from at least
10 different states as well as Canada and Ecuador. A guy
from Austin picked it up today.
Thanks for the listing. This is a great service."
|
|
Surfboards for Sale
~ Shapes by Gene Gore ~
Pickup only on SPI. Prices negotiable. Click here to email or call 956-772-7272
|
9'0"
22-3/4 x 19 x 15 x 2-7/8
Custom Art by Rachel
$500 - Like new
click on image for full size photo
|
9'0"
22 x 18-1/2 x 14-1/4 x 2-5/8
Speedfin Thruster
$200
SOLD
click on image for full size photo
|
|
5'10" Glass-on Quad
19-1/4 x 12-1/2 x 14-1/2 x 2-1/4
High performance
$200
click on image for full size photo
|
5'10" Glass-on Quad
20 x 14-3/4 x 15 x 2-3/8
Custom neon art
$250
click on image for full size photo
|
|
5'10" FCS Quad
19-1/2 x 14-3/4 x 14-1/2 x 2-3/8
$200
click on image for full size photo
|
5'10" Swallowtail Quad
20 x 15-1/4 x 15-3/8 x 2-1/2
$200
click on image for full size photo
|
|
~ Hawaii shapes ~
|
5'0" CSH Hawaii
16-1/2 x 11-1/2 x 13-1/2 x 1-7/8
Custom Jr Pro model from the North Shore
$400 - Like new
click on image for full size photo
|
5'1" Aipa Kneeboard
22 x 18-3/4 x 16-1/4 x 2-1/2
Rare collectable
$300
click on image for full size photo
|
|
Sold boards |
SOLD
  |
SOLD
6'1
19 1/4" wide
2 1/4" thick
Great board for when the waves are a
little on the mushy side. Swallow tail
with full rails. Shaped by Greg Sauritch in Encinitas, CA.
Killer airbrush to boot!
Has some dings, but all are repaired
and is water tight. Some delam on
the deck near the tail, but not too
bad and glass is not cracked.
$235 obo
|
|
|
SOLD
 |
SOLD
6'10" Fish
shaped by SIC Surfboards.
Fun board, in good condition.
$325
|
SOLD
  |
SOLD
6'3
18 3/8" wide
2 1/4" thick
Squash tail thruster great all around board!
This one is in near perfect shape! One ding
near the nose and has been fixed and that's it!
Rails are tapered to be thin, but maintains
thickness in the center of the board. Shaped
by Greg Sauritch in Encinitas, CA. Great board!
$285 obo
|
SOLD
 |
SOLD
Practically
new 8' 6" Roland long board.
Tri-fin with removable rear fin. Comes with xm
big wave leash. No major dings and no repairs.
Very fun board for Gulf surfing!!!
was asking $475.00 obo.
REDUCED PRICE $375
Board located in Houston, TX
|
SOLD
  |
REDUCED
PRICE
$600
Jim in Corpus Christi
(361) 825-2708
email
|
SOLD
  |
SOLD
FRY
7’-6”, “Quad Fin - Bat Tail”, Epoxy,
13.5”N. x 21.1”W x 15”T.
Beautiful and like new condition, only 1 year old.
A real “Rocket” for those good days and anywhere
you want to travel.
With tail pad and a barely used 8' leash.
Cost $750 new, asking $470 (priced to sell fast).
Need cash to buy a long board since I have a recent shoulder
injury and need lots of floatation.
|
SOLD
 |
SOLD
mail ordered this for my 9 2 … it is too long for
roof carry on my Jeep …
BRAND
NEW , never been used Balin Tour 5mm Bag 9’6” Inc/shoulder
strap … fits a 9’4” to 9’8”
nicely…. Velco fin slot….
$76.00 cash |
SOLD
 |
SOLD
6’11” Hurricane w/ Dakine travel bag
Good condition, 4 yrs old
Custom shaped by James Fulbright at Surf Specialties
Dimensions: 6’11” x 21.5” x 2.5”
Future Fin System
Minor scratches to rail
Galveston, TX |
SOLD
 |
SOLD
Vintage 1963 Fry Controller Longboard:
10' long, t-band stringer 1" balsa with (2) 1/4"
redwood sringers, original wonderbolt fin, the board is
very solid and would make a great rider or wall hanger.
Not many Fry Controllers around. Great "Texas"
collector board.
$600.00
Located in Pearland (between Houston and Galveston) |
SOLD
 |
SOLD
channel island fish 6 foot 2 inches --
perfect condition.
no dents, no scratches.
3 inches thick.
rides awesome.
killer deal.
only problem is i already have 5 fishes.
picture attrached.
$500
Houston, tx. |
|
|
SOLD
  |
SOLD
6'8" Tuflite Al Merrick Flyer
Nose 12.00"
Mid 20.50"
Tail 15.00"
Thickness 2.88"
Fins FCS K Fin 2.1
Board is in great condition I am just looking for something
a little smaller. One small ding close to nose that was professionally
repaired.
$350 OBO
Location: Corpus Christi |
SOLD
  |
SOLD
9' 0" Hobie PSD with Dakine Daylight boardbag
Surftech model, white deck with red rails and bottom, tri-fin
Length: 9'0"
Nose: 17.88"
Mid: 23.00"
Tail: 14.00"
Thick: 2.88"
Excellent Condition
Price:
$600
Location: "Landlocked in Dallas"
|
SOLD
 |
SOLD
Grom Surfboard from Surflife.
6"-4" with jelly fin and leash. Good safe first
board for groms 4 - 11 years old and up to 110 lbs.
Price:
$85
Location: Houston, TX
|
SOLD
  |
SOLD
6'0" SOUL FISH Red Black
LENGTH: 6'0" 182.88 cm
NOSE: 15.50" 39.37 cm
MID: 20.13" 51.12 cm
TAIL: 15.25" 38.73 cm
THICK: 2.38" 6.05 cm
VOLUME: 33 liters
FINS: FUTURE
Ridden twice
$350.00 OBO
Location: SPI
|
SOLD
 |
SOLD
7'0"
Mike Doyle Custom (MDC) Funshape.
Like-New Condition. FCS.
With leash and DaKine board bag.
$250.00
Location: Corpus Christi, TX.
|
SOLD
 |
SOLD
6'2"
x 18.25 x 2.25
JC Hawaii "Gem" model.
Glassed-in fins.
Beat but still fun.
$85.00
Location: Corpus Christi, TX.
|
SOLD
 |
SOLD
9'6" Modern Long Board
$400 o.b.o.
Paypal accepted
Harlingen Tx |
SOLD
  |
SOLD
REDUCED PRICE
$475 was $575.00
I've got a beautiful walden magic for sale. its an 8' 6"
clark foam and includes leash and board bag, real good condition.
purchased last summer, it was only ridden here, so you can
easily say 'gently used" - ha!
|
SOLD
  |
SOLD
6’-6” Channel Islands Single Fin G2
**Ridden less than 10 times (NO DINGS!!)
Paid $750 – FOR SALE $400 OBO –must sell
Please contact Chris @ 361-949-1722 or krs172@sbcglobal.net
Board located in Corpus Christi.
|
SOLD
 |
SOLD
12' Steve Walden
custom stand/up/paddle board with 7' Kialoa aluminum/carbon
fiber paddle.
Excellent condition.
You know what these babies cost (and there
are no more 12' blanks available)
$1,000.
Location: South Padre Island.
|
SOLD
|
SOLD
Surf Prescriptions Pro-Fish
6'0"-19 1/4"-2 1/4"
Winged swallow tail. FCS fins, tail patch, and leash. Great
condition, has two dings that were repaired right away. |
SOLD
 |
SOLD
9'0" Gene Gore Longboard
18-3/4 x 22 x 14-1/4 x 2-5/8
Speeedfins S120 Tri
Good condition
|
SOLD
 |
SOLD
10'6", magic model. Killer Board!!
|
SOLD
  |
SOLD
For sale, 9'1" Driftwood longboard shaped by Tommy
Maus. Beautiful balsa rails (chambered balsa, NOT veneer)
with wood tail block. This board is in excellent condition
with only pressure dings on top consistent with being ridden
for the past several years. There are no dings or leaks
in the fiberglass, and the balsa rails are nearly indestructible!
I'm asking $475 for this unique longboard that looks great
on the wall, yet loves to be ridden. The board is in Clearlake
(Houston).
|
SOLD
  |
SOLD
6'6" Surfboards Hawaii "Glass Slipper"
Removable fins
Repaired dings on nose and tail but
water tight.
Good solid fun shape board.
$250.00
Austin Area (but at the beach often)
Contact paul@thedecoderring.com |
SOLD
  |
SOLD
Hosanna Custom Longboard
9' 0 x 22" x 2 1/4"
Good condition. This board is a fun Gulf Coast board that
rides great in surf from knee high to overhead.
Board is located in Corpus Christi.
$200.00
|
SOLD
 |
SOLD
I've got a 9' 4" 1960's Harbour Rapier that I'd like
to post on your classifieds. Its got a single removable waveset
fin. Its in good condition and ready to ride. Would make a
great vintage rider for contests. The board is located on
Tiki Island down by Galveston.
Asking $450. |
SOLD
  |
SOLD
Robert August Longboard/Saber Model
9’0”, shaped by Mike Minchinton.
Tri fin setup with 7" middle fin.
Killer board, in great condition. $400.00
Ed
Bockholt
Round
Rock, TX
email
830-237-6099 cell
|
SOLD
 |
SOLD
7' T&C New Zealand Craig Hughes
7'x19"x2 1/4"
fair shape (pressure dents, repaired dings)
glassed on fins in great shape
FCS leash included
can send more pics if needed
asking $150
|
SOLD
  |
SOLD
6'6" Channel Islands Flyer shaped by Al Merrick $175.00!!!
Will sell for $160.00 with out fins. This board is a tested
warrior and a steal at this price. Any damage that the board
has withstood has been expertly repaired. Board is water
tight with no delamination. I cracked the nose but did not
break it off and had it expertly repaired immediately. Also
broke off a fin and experienced some fin box damage but
I also had this repair done immediately by an experienced
fiberglass repair, uh, guy. Glass work is smooth, clean
and strong. This board still has years of waves left in
it! |
SOLD
  |
SOLD
Custom Anderson 7'11" Fun Board
16" x 21 1/2" x 14 1/2" x 2 1/2" thick
Great shape and design for Gulf Coast!
$350
|
SOLD
  |
SOLD
Like New JLS :
9 ft x 18 1/2 x 22 3/4 x 14 3/4 x 2 3/4
ridden twice
$300 |
SOLD
 |
SOLD
9'6" 2006 Gene Gore Single Fin Noserider |
SOLD
  |
SOLD
9'4" Wingnut |
SOLD
 |
SOLD
Small wave single fin
6'9"
20.5" wide
3" thick
$225
Houston
|
SOLD
 |
SOLD
$350 must sell!
6’6” Custom Fry bump swallow
tail with channels. Ridden
about five times.
Includes deckpad and
prolite day bag.
located in Pearland (Houston) |
SOLD
  |
SOLD
7 foot spyder. Nice used board.
Never have time to use it. Not a beater.
It seems to have a signature on the bottom
and serial number or something.
$250.
Location: Galveston.
|
SOLD
 |
SOLD
Two new 9' EPS
surfboard blanks
$100 for both
|
SOLD
|
SOLD
6' 6" Byrne. It's a little over 10 years old,
with glassed in fins and is still in really
great shape, considering. The bottom has
some pressure dings but nothing too bad. This board has only
been ridden once or twice in the last 10 years! Good solid
board for the
price - $200.00. I can e-mail more detailed pics or answer
any questions to those who
are interested. Board is in Brownsville. |
SOLD
  |
SOLD
9'2" Fry
This High Performance epoxy board was made for the Gulf
Coast. It has a hydro-hull making it fast down the line,
and a spoon nose concave to give you lift when nose riding.
Fry has added nose and tail rocker to help
you get up on the nose and stay there, this added rocker
will also help you turn on a dime. Comes with a blue 9'6"
board sock.
$500.00
|
SOLD
 |
SOLD
I have a vintage (1967) Challenger "Bump" longboard
for sale. The board is 9' 8" long and has a step deck
nose. All original and in nice condition. Ready to ride
or hang on the wall. Asking $750 or possible trade. Located
in Houston.
|
SOLD
  |
SOLD
6'0" Mike Doyle Custom Fish
Sweet
board, I am just looking for
something a little bigger. Comes with a set of FCS MR-X
Carbon Lite Twin Fins.
$300.
|
|
SOLD
Ben Aipa 9'1"
18 1/2 nose x 22 1/2
wide x 14 3/8 tail
x 3 thk, Kanoa Dahlin epoxy surfboard.
Made
by Boardworks which I consider to
be better than the Surftech boards...Boardworks
are not as 'corky' or as plastic feeling in the surf. The
board is in perfect condition (1-1/2 yrs. old). The
discoloration you see in the image is due to the flash and
shade in the afternoon. The board is light, fast, easy to
paddle and nose ride. More like riding a 8' board as far as
manuverability. It is also a great learning board since it
is light and easier to turn.
Bought it new for $780. Selling for $500.
Also comes with a leash. Board is stripped
so it will need wax.
|
SOLD
  |
SOLD
7' 6" x 21" Fry epoxy
textured bottom
ridden only a few times,
not a scratch.
|
SOLD
  |
SOLD
9'0" Gore Texas Noserider Model
18-3/4 x 21-3/4 x 14-1/4 x 2-1/2
Powerlite EPS 2# epoxy
SpeeedFin S120
|
SOLD
  |
SOLD
HIC Kerry Tokoro
6'1" 18 7/8" 2 1/4"
Very fun single to double concave
everyday junk shredder. Has FCS YU
fins, so its meant for a medium to small
rider. Perfect for the Gulf conditions.
I've ridden it in surf up to about ten foot.
Any bigger and you're gonna be skippin'
on this chip. Excellent condition.
$240
|
SOLD
  |
SOLD
"Seven"
5'11" x 19 1/4 x 2 1/4
Hardly been used, few pressure dings,
still in good shape.
|
|
SOLD
7'10" Hawaiian Pro-Design by
Donald Takayama DT-EGG,
made in Oceanside
California, excellent condition,
Fibre-glass, Tri-fin with blue canvas
carrying bag and shoulder strap.
It is easy to catch the small or big
waves, I'm 225# and it worked well
for me when in San Diego.
New is $699, asking only $399 obo
|
SOLD
  |
SOLD
REDUCED PRICE!!
Tom Eberly
6'0" x 15" x 20" x 15" x 2 1/4"
New
board.
Only ridden a few times.
Great Buy!
Paid $450.00
$300.00
|
SOLD
  |
SOLD
5'10" , 2 3/8, 13 1/2 x 19 x 14 1/2, futures,
$200.00.
|
SOLD
  |
SOLD
REDUCED PRICE!!
Ezera
6'0" x 18 1/2" x 2 7/16"
Great
board for the price.
I hate to get rid of it
but I really need the money.
$100.00
|
SOLD |
SOLD
12' Infinity Paddleboard
$300
call ON THE BEACH
956-761-1194 |
SOLD
  |
SOLD
Mike Doyle Custom
6'1 x 18 1/2 x 2 1/4 swallow tail,
good Texas
shortboard
REDUCED
PRICE!!
$150
|
SOLD
  |
SOLD
Rusty
6'0 x 18 1/4 x 2 1/4 squash tail,
high performance shortboard
$150
|
SOLD
|
SOLD
8'0 x 21 1/2 x 2 7/8 lighthouse funshape
Good condition, some pressure dings on
top but no major damage. Good board to
learn on. Comes with fins, leash, and
good board bag. Email me if interested.
$350.00 (OBO)
|
SOLD
 |
SOLD
7'6"
WRV Fun Board
Almost Brand New Condition
(only 3 times out).
New:
$560 Asking $450. |
SOLD
  |
SOLD
10.6" Mark Martinson/Robert August
Super floater, green deck w/1/2" stringer,
Koa wood nose and tail blocks
Beautiful board, custom built for gulf.
Excellent condition.
$700.00 OBO
|
SOLD
 |
SOLD
Maurice Cole Australian Import
Brand New, Never Waxed or Ridden!!
Length - 6'5", Width - 18 3/4",
Thickness - 2 3/8",
Bottom - Single to Double Concave,
Tail - RSQ,
Model - Trent Munro, Color - Clear,
Fins - FCS
Regular $585.00 Will Take $350.00
|
SOLD
  |
SOLD
REDUCED PRICE!!
6'1" Linden- This is a true thruster board
and was made with the modern day surfing
style in mind. It has art on top and bottom
and has an traction pad on the tail. This
board has been repaired at the
tail and along the rails.
$170.00
|
SOLD
  |
SOLD
Al Merrick Small K
5'11 x 18 3/4 x 2 1/4
small wave catcher
$300
|
SOLD
 |
SOLD
1970's style GUN, with a low
kick. Pintail.
Solid. 7'3" about 2-2.5" thick with rounded
old-style rails. Widest across is 19.5" with
1 foot in from the tail being 12" across,
and same for one foot in from the nose.
Very nice board. Tri-fin, wooden, englassed
in with the board. Has had a repair or two.
Very pretty, not fancy, board.
$110 plus shipping
|
SOLD
  |
SOLD
Yancy Spencer
“Big
Guy’s” fish
6’ 6” epoxy board
16 ½ X 21 ½ X 14 ½
2 5/8 thick
$395.00 |
SOLD
 |
SOLD
6"6"
Christenson rounded pin
ridden maybe 10 times. $200.00
|
SOLD
  |
SOLD
6"8"
sauritch 11*20*14...2.5inches thick
...good condition...trac-top...nose-guard
...fcs fins....$225.00
this board rips....do you?
|
SOLD
  |
SOLD
Custom Erie Peeples Tri-Fin Surfboard
Dimensions
7’2” 21 ¼ 2 7/8 w/swallow tail
and FCS fin system. Comes with Deck pad
and Pro-Lite board bag. Excellent condition
ridden very few times, need a smaller board.
Asking
$475.00
|
SOLD
 |
SOLD
6"0" X fish.
No dings great condition!
7 year old sons board,
ridden maybe 10 times.
250.00
|
SOLD |
SOLD
6'5" Flying Fish
18-3/8" wide, 2-1/8" thick
$150.00
|
SOLD
 |
SOLD
Brand new AL Merrick Fish.
6'6" ridden 1x.
600.00$ brand new board if in shop
685.00 plus tax. since ridden once
600.00 notax.
|
| |
SOLD
Longboard for sale
Pink rail panels, chick stick.
South Padre Surf Co.
Shape by Gene Gore
9'0''
Good condition
picture
|
SOLD
 |
SOLD
16' Hobie Cat
Good condition
With trailer
$700
|
SOLD
 |
SOLD
McTavish 7'7" Carver (Surftech)
N: 13
M: 21
T: 14 3/4
TH: 2 3/4
Super Light and Fun
|
SOLD
 |
SOLD
U nit B board, an
excellent shaper (Chris Mullens)
on The Island in Corpus Christi.
6' 1". In good shape. $175.
|
SOLD
 |
SOLD
Bessel Fish
6'4" 14 1/2x19 1/2x14 1/2x2 1/4
clean board
$375
|
SOLD
 |
SOLD
7' 6" Blue Surfboards
Tri Fin
Used a couple of times.
Excellent condition
REDUCED PRICE
$275
|
SOLD
  |
SOLD
10' Dewey Weber "professional"
"One of a Kind" single fin
w/custom & authentic
Hawaiian fabric inlay !
comes w/red Legend hatchet fin !
it has a couple of dings from shipment
but nothing major
all dings were patched professionally !
asking $500.00 obo
|
SOLD
 |
SOLD
This is a fun shape hybrid,
7' 3" that catches everything.
The board has been ridden a lot
and is still in decent shape.
Great buy $250. |
SOLD
 |
SOLD
Rodney Dahlberg Australian Import
Brand new! Never ridden or waxed!
Length - 6'3", Width - 18 3/4",
Thickness - 2 3/8",
Bottom - Single to Double Concave
Tail - Occy Round
Model - Occy, Color - Clear, Fins - Futures
Reg. $585.00 will take $450.00
|
SOLD
|
SOLD
9'0" Benjamin Tri-fin
Mike Doyle shaped
22 1/4" wide
10' Surf More leash included.
Rarely used, has been hanging in
the garage for several years.
Has a few dings and dents but
nothing that needs repair.
$250
|
SOLD
 |
SOLD
9'0'' T&C Hawaii
22-1/4x19x14x2-7/8
$350
|
SOLD
 |
SOLD
Bruce Jones 8'8" Hybrid
nose 15" x width 23"
tail 14.75" x
thickness 3"
Has Gecko X-Grip decking,
no dings
in excellent condition
only used about 12
times.
|
SOLD
 |
SOLD
7'6'' FLYING FISH
BARELY USED
.....$300.00
|
SOLD
 |
SOLD
8' WALDEN EPOXY
....$325.00
|
SOLD
 |
SOLD
7'6" Fry Epoxy Thruster
Excellent Condition - Like New
Traction Pad, ProLite Day Bag,
FCS Leash & a Epoxy Ding Repair
Kit included
$450
obo
|
SOLD
 |
SOLD
Robert August Mike Doyle
Surftech Woody
Wood tail and Nose Blocks
Great shape - Few repaired spiders
A beautiful board, with the Hawaiian
print nose & fin
10 ft x 19 3/8" x 23 1/4" x
14 7/8 t x 3 1/4 th
$550.00
|
SOLD
 |
SOLD
6' 4" Al Merrick
Channel Islands
18 1/2" wide x 2 3/8" thick
FCS Fins
OAM Traction Pad
Exellent condition
$ 300
obo
|
SOLD
 |
SOLD
7' 0" Rusty
19.5" wide x 2.5" thick
FCS Fins
Great
condition
with minor pressure dings on top
and pea size ding on bottom
repaired immediately
$ 250 obo
|
|
SOLD
Seven Fish - 6'7 - 20X3/4 - 2 x 5/8 -
The board has FCS fin system,
the tail has some minor patch
up and there is a small ding
towards the nose of the
board. Other than that the
board is still
in great condition and rides like
new. I also put a brand new
kickpad on about
a week ago New is $349.00
selling it for 200.00 obo.
Willing to trade for board
that better fits me.
|
SOLD
 |
SOLD
1965 VINTAGE GORDON & SMITH LONGBOARD
10'
long • T -band stringer:
1" balsa with (2) 1/4" redwood stringers
(2) black pigmented resin stripes
Red Gordon & Smith Logo
Blue glassed on Fin
Blue resin tailblock
Serial no. 8650 +
This is a very clean vintage G&S
longboard for a very fair price
of $850.00 (OBO). This board is
ready to ride or hang on the wall.
|
SOLD
 |
SOLD
1965 10' 2" Bayne it's white with
a red paisley noise, red and green
stringer and (small ding on the tail)
tail, and black shark fin skeg.
Make offer
|
SOLD
 |
SOLD
1965 10' 2" Bayne it's white with
a red paisley noise, red and green
stringer and (small ding on the tail)
tail, and black shark fin skeg.
Make offer
|
SOLD
 |
SOLD
6' 8" Rusty Hiptser C-5
19.6" wide 2.5" thick
Six months old, few pressure dings.
$$ 300. |
SOLD
 |
SOLD
6' 8" Sharp Eyes
20" wide 2.6 thick GL-1
1 year old, excellent condition.
$$ 275
|
SOLD
 |
SOLD
"Signature" Dale Velzy 1963 Pig Model:
Dale Velzy hand-shaped this board in 1999
and signed the blank. Would make a nice
collector, wall hanger, or rider.
If interested,
Dimensions:
9'10" long X 16.75" nose X 23.25" width
X 16" tail X 3.5" thick.
Lamination:
Volan cloth top and bottom, volan deck
patch, cut laps, gloss & polish .
Blank:
Custom with 3 balsa stringers -
two 1/4" offset and one 1/8" in
the middle.
$850.00
|
SOLD
 |
SOLD
6'2" x 181/2" x 21/4"
Surf Prescriptions.
About 1 year old.
Good condition with some
pressure dings. $250 obo
|
SOLD
 |
SOLD
Rode for 1 hour Fry Epoxy
16x21x16x3x6'4"
$500
|
SOLD
 |
SOLD
This is a 9'3 infintiy rad noserider
that is about 6 months old. The
board is good shape. It has a
spider ding on the nose,
and some small ones from my
heel on the deck.
none of them are cracked through
the fiberglass this board really sticks
noserides. I rode it single fin but is
ridden cluster style by lots
of poeple for increased
manueverablity.
|
SOLD
 |
SOLD
9’0 Hurricane Precision Surfboard
Single
fin, 22.5’ wide, 8” square tail,
2.5” thick, A great gulf coast long board!
Shaped by Bob Martin
- $145 obo
|
SOLD
 |
SOLD
7'8" Rusty (Rounded Pin)
Rarely
Used & In Good Condition
200.00
obo
|
SOLD
 |
SOLD
This board is a 6'6" Pancho
Sullivan epoxy. My five year
old rode it four times. The
board is in PERFECT shape.
400.00$ reg. 550.00.
N: 11 3/8 M: 19 3/8 T: 13 7/8
Th: 2 1/2
|
|
|
|
SOLD
9' Soft-top
Good Condition
$225
|
|
SOLD
9'2'' Becker -
Mike Gee X Model
22 x 2-5/8
Good condition
|
SOLD
 |
SOLD
9'0'' Gore
Pintail
single fin
Good condition
10 months old
$275
|
SOLD
 |
SOLD
This board is about 9 months old and
has rarely been ridden. I am selling
it to get something a little bigger.
The diminsions are 6' x 18" x 2"
with 3 G-3000 fins. Due to the lack of time
that I have with school, I do not
get to take this board out at all. The
board is in GREAT condition with very
few pressure dings.
For sale at $215 obo.
|
